Metal Structures | Race Car – Airplane – Catamaran

mototiznegy

Metal Industrial Company Introduction

mototizot

The main activities of the company

  • Manufacturing of aluminium structures

Aluminium structures in different sizes; from the size of 0.1 x 0.1 x 01 metres (10 cm3) to 20 x 10 x 4 metres, based on the demand of the customer welded with the AWI TIG/WIG (141, 142) or AFI MIG/MAG CO2 (131,135) procedure, upon request with weld inspection, prepared by a certified welder.

  • Manufacturing of stainless steel structures

Stainless steel structures in different sizes; from the size of 0.1 x 0.1 x 01 metres (10 cm3) to 20 x 10 x 4 metres, based on the demand of the customer welded with the AWI TIG/WIG (141, 142) or AFI MIG/MAG CO2 (131,135) procedure, upon request with weld inspection, prepared by a certified welder.

  • Manufacturing of titanium, inconel, duplex and super duplex structures

Titanium, inconel, duplex and super duplex structures in different sizes; from the size of 0.1 x 0.1 x 0.1 metres (10 cm3) to 5 x 2 x 1 metres, based on the demand of the customer welded with the AWI TIG/WIG (141, 142) procedure, upon request with weld inspection, prepared by a certified welder.

  • Manufacturing of monel, CuNiFe and brass structure

Titanium, inconel, duplex and super duplex structures in different sizes; from the size of 0.1 x 0.1 x 0.1 metres (10 cm3) to 5 x 2 x 1 metres, based on the demand of the customer welded with the AWI TIG/WIG (141, 142) procedure, upon request with weld inspection, prepared by a certified welder.

We are able to manufacture any kind of structures, from the engine holding structure of an airplane to the hull of a catamaran, in an accurate, X-ray-proof manner.

Our goal is to extend our business with the manufacturing of smaller, precision structures. Currently we deal with the custom manufacturing of big structures, but this activity in itself is not enough for sustaining the significant development of our company in the long run.

Staff of the company:

  • Currently the number of workers is: 6 people, out of this the number of blue-collar staff is 5 people.
  • Composition of our blue-collar staff: welders, locksmiths
  • The average age of the workers is 35 years.
  • Our white-collar staff consists of 1 person, who is responsible for leading the company and administration.
  • The company was set up in 2016, since then we have been developing continuously; it is our clear goal to extend the blue-collar staff and our machine park.

 Assets of the company:

  • We have basically all assets necessary for performing the aforementioned activities:
  • Our site is located at an industrial park near a motorway in Pest county. This is the place where we rent a 500 m2 The whole complex is a separate, enclosed unit. We do not have any security costs, as the whole industrial area is supervised by security guards.
  • We own two Miller XMS 425 Mpa welding machines, both of which were purchased in 2018. Furthermore, we own AVI welding machines and battery-powered and electric hand-held tools.
  • At the industrial site there are 2 forklifts which we can rent at any time, and
  • we own 2 lorries (one of 1.5 t and one of 0.5 t capacity).

Distribution of the staff:

The number of our manual workers is 5 people, out of this we have 3 skilled and 2 unskilled workers (these 2 people also have a qualification, but not connected to the metal industry, they are electricians). The number of our non-manual workers is 1 (the managing director)

Background and financial situation of the company:

  • The company was founded in 2016. We have two co-owners. One of us is responsible for manufacturing, the other person is responsible for leadership and administrative tasks.
  • Our revenue in 2017 has exceeded 25 million HUF.
  • More than 80 per cent of the whole revenue comes from three big customers.
  • Out of the remaining 20 per cent 5 per cent is from private customers, and the rest is from regular corporate partners.
  • Their detailed financial information can of course be viewed in the public reports.
  • We do not have any public debt, we are included in the database of taxpayers free from public debt.
  • We do not have any advertisement expenses at all, fortunately we always have enough work and therefore advertisement has not been necessary so far.
  • We always pay our suppliers on time, we do not have any debts towards them.
  • We do not have any liabilities.
  • We keep a bank account with OTP Bank.
  • At OTP we have a 4.8 million HUF credit facility, and more or less we always make use of this opportunity.
  • We pay our workers on time.

The company was started 4 years ago from a small garage. In 2015 the founders, a welder with 8 years of experience in Germany and a university student studying technical management, had a successful private development project, and decided to continue this cooperation. From 2016 on, now as professional entrepreneurs, we have been consciously and gradually developing the company.

Even with the continuous developments and extension, our company is still not near the goals we would like to achieve, but by making sacrifices and working hard every day we strive to achieve the desired level as soon as possible (e.g. we would like to double our manual staff within 1 year).

Thank you for your kind attention, we are looking forward to hearing from you soon. Please contact us if you have any questions. We always try to answer on phone or emails as soon as possible!

gömb

Some of our assignments so far…

moto

We founded the company in 2016. At first we started to work in the business of racing car manufacturing and the manufacturing of roll cages. In cooperation with the National Automobile Sport Federation of Hungary (MNASZ), which is a member organization of the International Automobile Federation (FIA), our company has become a certified roll cage manufacturer. In the first part of our portfolio we are introducing some of these assignments.

We have sized and bent the bars ourselves, and we prepared them with a high level of accuracy and care, as due to the function of these bars (rally, drift, speeding) peoples’ lives depend on the accuracy of our work, therefore the FIA-qualification is indispensible, as it serves as a safety assurance.

Besides metal structures manufactured for racing cars, we also started to produce other types of precision structures, such as engine holder structures for planes, rotor blade housing of helicopters, simulator stands, custom made pieces of furniture, manifolds, exhaust systems, etc.

In only 2 years our company has reached a level in labour force as well as in liquidity, that from May 2018 we are manufacturing the hull of an 11-ton catamaran, including the structure and the shell plating.

Our goal is to increase the number of our manual staff, however in order to achieve that, we need to go to the direction of small- or medium-sized serial production in smaller or medium quantities. For information on the materials and sizes, see the first part of our portfolio.

motoe

FIA homologue roll cage certified by MNASZ (National Automobile Sport Federation of Hungary), Nissan 200SX S13 “Rocky”

motoket

“Rocky” manifold: our goal was that the turbo charges at the lowest possible rotational speed. The result is that already at 3300 Rpm, at full pressure we already have turbo (similar cars in the category only charge fully from 4150 rpm).

motohar

The crown shaped exhaust system in the middle of which the WasteGate pipe can be seen was produced from stainless steel.

motonegy

This is a unique custom made racing car with a modified metal structure (Nissan 200sx S13 chassis with a 3000cm3 Toyota Supra engine, at the lower turbo pressure 630 horsepower 940 Nm, modified pursuant to drift racing regulations with a FIA homologue roll cage, called “Rocky”).

(2017 national championship 1st place, 2017 FIA CEZ 2nd place racing car)

We have created the crown-shaped exhaust nozzle, the roll cage, the manifold, as well as the vacuum line.

motoot

FIA-compliant roll cage, certified by the National Automobile Sport Federation of Hungary (MNASZ), primer-painted, rear view (BMW chassis 46).

motohat

Ford Sierra roll cage compliant with the FIA standards.

motohet

Toyota Soarer roll cage compliant with the MNASZ and FIA standards, during manufacturing.

motonyolc

FIA-compliant roll cage, certified by the National Automobile Sport Federation of Hungary, primer-painted, rear view (Nissan 200sx S13 chassis).

motokile

FIA-compliant roll cage, certified by the National Automobile Sport Federation of Hungary (BMW E36 coupe chassis).

mototiz

Custom made exhaust pipe and WasteGate, with a special nozzle.

mototizegy

This is a unique crankcase gas oil catch can, produced for the racing car seen below.

mototizket

Custom made WasteGate and exhaust system (for the Ford Sierra mentioned above).

mototizhar

Custom made manifold for a 670 hp, 2500 cm3 Ford Sierra with a turboed BMW engine.

mototiznegy

In the picture you can see one of the hulls of an 11-ton aluminium catamaran, with an assembled, welded structure. Our assignment is for producing the two hulls of the catamaran and the structure connecting them.

mototizot

This is the hull of the catamaran, photographed from above. However, this is the bottom of the catamaran, as it is welded together in an upside down position. As its only horizontal part can be found on the deck keel side, the raster has also been adjusted to this, so that it can be produced with the highest possible accuracy.

mototizhat

The picture shows the holding structure of an electric aircraft’s engine and battery, after the weld inspection. It was manufactured at the end of 2017, however we produced a similar structure also in 2016. The materials are: stainless steel and 15CrMoV6.

mototizhetes

This is a close-up about the nose-tip of the structure shown above.

mototiznyolc

A polished product made by us from stainless steel.

mototizkile

A product cut and assembled and welded by us.

motohusz

A custom made simulator stand with primer paint, and an adjustable, accurately fitting steering wheel holding console in the middle.

2c04a-g25c325b6mb

innova

imntumblr

csik
imntublr

  Follow us on:   

https://www.linkedin.com/company/h-mor-aut-h-z-kft-   https://www.xing.com/xbp/pages/intercontact-marketing-network-ltd            Twitter  https://plus.google.com/111874594519954959783        
 .
再見 * Goodbye  *  Adiós * Au revoir  * Adeus * Auf Wiedersehen * До свидания * Arrivederci  * さようなら * Güle güle * Selamat tinggal *  नमस्ते  * Totsiens * Αντίο *
معالسلامة  * Tot ziens * Adiaŭ * Kwaheri * Do widzenia * Viszontlátásra *
.

Thank you all for viewing!

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s